The following Lab was conducted on Eve-NG. The image used was Cisco IOL. The images were obtained from Cisco VIRL.
| VLAN Number | VLAN Name | Switch Interfaces |
| 10 | Sales | Sw1 e1/0 & Sw2 e1/0 |
| 20 | Managers | Sw1 e1/1 & Sw2 e1/1 |
Task 1:
Configure the hostname on both switches.
Task 2:
Configure Sw 1 as the VTP Server, and configure Sw2 as the VTP Client. Both switches should be on the VTP domain cisco.com.
Task 3:
Configure and verify Ethernet0/0 between Sw1 & Sw2 as a 802.1q trunk.
Task 4:
Add VLANs 10 & 20 on the VTP Server. Verify that the client switch has updates with the VLANs from the VTP Server.
Task 5:
Configure PC with corresponding IP addresses. Place the ports on corresponding VLANs as depicted in the topology. Configure the ports as access ports.
Task 6:
Ping the opposite PC of the same VLAN. 192.168.10.1 (VPC1) to 192.168.10.2 (VPC5). Repeat with the other PCs 192.168.20.1 (VPC2) to 192.168.20.2 (VPC6).
